Petro-Canada SENTRON LD 8000 Stationary Gas Engine Oil

Product Description

SENTRON LD 8000’s exceptional performance is especially important in the severe service conditions common in compression, power generation and combined heat and power applications. Its outstanding anti-wear protection helps to minimize polish and wear of cylinder liners and wear of piston rings, while helping to reduce carbon buildup.

£20 OFF WHEN YOU
ORDER TODAY

Type / Applications

  • Stationary Gas Engine Oil
  • Reciprocating Compressors
  • Premium

Revolutionary extended drain intervals can reduce maintenance and provide savings:

• Field tests show that SENTRON LD 8000 extends oil drain intervals by up to 300%* in Caterpillar G3500TALE engines, in a natural gas compression application in comparison to the leading global conventional competitor. This trial was completed with pipeline gas quality, under high load > 90% conditions. The extended drain interval helps to:

  • Reduce downtime and maximize production availability.
  • Lower operating costs by reducing maintenance costs.
  • Increase uptime, leading to a reliable business operation.

Longer oil life provides long-lasting equipment protection:

  • Exceptional resistance to breakdown caused by oxidation and nitration.
  • Outstanding capability to neutralize acids through greater Total Base Number (TBN) retention. The greater the TBN retention, the greater the ability of the oil to neutralize acid, extend drain life and inhibit wear, corrosion and deposits.
  • Helps extend engine life by reducing varnish, sludge and carbon deposits as well as by inhibiting wear and corrosion.
  • Helps improve engine performance.

Outstanding anti-wear/anti-scuff protection helps to:

  • Reduce wear on piston rings, cylinder liners and bearings, prolonging engine life and reducing oil consumption.
  • Control and minimize valve recession.
  • Reduce operating and maintenance costs.

Keeps engine parts clean by:

  • Minimizing ring zone and valve stem deposits.
  • Improving engine lubrication by maintaining clean oil-ways.
  • Maximizing the time between major engine overhauls.
  • Preventing corrosion.

Inventory consolidation:

  • Specially formulated to enhance nitration control, SENTRON LD 8000 is suitable in both low and high nitrating engines, thus allowing the consolidation of products which apply to only one type of nitrating engine.
  • SENTRON LD 8000 goes a step beyond SENTRON LD 5000 in terms of nitration control.

A premium Low Ash SAE 40 lubricant, suitable for use in 4–stroke engines operating on natural pipeline gas, pre-treated sewage/biogas and selective pre-treated process gases.

OEM Approvals

2G

  • Series: Agenitor, Avus 500, Avus 500 Plus
  • Fuel: Natural Gas
  • Approval Class: Verified for Use

GE-Cameron

  • Series: Cooper-Bessemer 4-Stroke Engines
  • Fuel: Natural Gas
  • Approval Class: Suitable for Use
  • Reference: SE114-2

Caterpillar

  • Series: G3300 - G3600
  • Fuel: Natural Gas
  • Approval Class: Verified for Use
  • Reference: SEBU6400-05

Caterpillar Energy Solutions / MWM

  • Series: MWM TBG 616, 620, 632, MWM TCG 2016, 2020, 2032, Cat CG 132, 170, 260
  • Fuel: Natural Gas
  • Approval Class: Approved for Use
  • Reference: 2105/19

Caterpillar Energy Solutions / MWM

  • Series: MWM TBG 616, 620, 632, MWM TCG 2016, 2020, 2032, Cat CG 132, 170, 260
  • Fuel: Biogas, Sewage, Landfill
  • Approval Class: Approved for Use
  • Reference: 2105/19

Caterpillar Energy Solutions / MWM

  • Series: MWM TCG 3016, 3020, 2032B, Cat CG 132B, 170B, 260B
  • Fuel: Natural Gas
  • Approval Class: Approved for Use
  • Reference: 2105/19

Caterpillar Energy Solutions / MWM

  • Series: MWM TCG 3016, 3020, 2032B, Cat CG 132B, 170B, 260B
  • Fuel: Biogas, Sewage, Landfill
  • Approval Class: Approved for Use
  • Reference: 2105/19

Caterpillar Motoren GmbH (formerly MaK)

  • Series: All GCM
  • Fuel: Natural Gas
  • Approval Class: Suitable for Use

Cummins

  • Series: QSK, QSV
  • Fuel: Natural Gas
  • Approval Class: Suitable for Use

Deutz (Cologne)

  • Series: TCG2015
  • Approval Class: Suitable for Use

Innio-Jenbacher

  • Series: Installations with catalyst
  • Approval Class: Approved for Use
  • Reference: TA 1000-1109

Innio-Jenbacher

  • Series: 2 - 3
  • Fuel Type: A, B
  • Approval Class: Approved for Use
  • Reference: TA 1000-1109

Innio-Jenbacher

  • Series: 4 Version A + B
  • Fuel Type: A, B
  • Approval Class: Approved for Use
  • Reference: TA 1000-1109

Innio-Jenbacher

  • Series: 4 Version C or Newer
  • Fuel Type: A, B
  • Approval Class: Approved for Use
  • Reference: TA 1000-1109

Innio-Jenbacher

  • Series: 6 Version C + E
  • Fuel Type: A, B
  • Approval Class: Approved for Use
  • Reference: TA 1000-1109

Innio-Jenbacher

  • Series: 6 Version F or Newer
  • Fuel Type: A
  • Approval Class: Approved for Use
  • Reference: TA 1000-1109

Innio-Waukesha (mandatory use of approved oils in cogen installations and in APG 220 installations)

  • Series: VGF F18, H24, L36, P48 G, GL, GLD
  • Fuel Type: All
  • Approval Class: Approved for Use
  • Reference: 12-1880AM

Innio-Waukesha (mandatory use of approved oils in cogen installations and in APG 220 installations)

  • Series: VGF F18, H24, L36, P48, GSI, GSID
  • Fuel Type: All
  • Approval Class: Approved for Use
  • Reference: 12-1880AM

Innio-Waukesha (mandatory use of approved oils in cogen installations and in APG 220 installations)

  • Series: VGF F18, H24, SE
  • Fuel Type: All
  • Approval Class: Approved for Use
  • Reference: 12-1880AM

Innio-Waukesha (mandatory use of approved oils in cogen installations and in APG 220 installations)

  • Series: VHP F3521, L5790, L7042, P9390 G, GSI, GL
  • Fuel Type: All
  • Approval Class: Approved for Use
  • Reference: 12-1880AM

Innio-Waukesha (mandatory use of approved oils in cogen installations and in APG 220 installations)

  • Series: VHP F3514, F3524, L5794, L7044, GSI, L5774, L5794, LT
  • Fuel Type: All
  • Approval Class: Approved for Use
  • Reference: 12-1880AM

Innio-Waukesha (mandatory use of approved oils in cogen installations and in APG 220 installations)

  • Series: 275GL/GL+ 12V, 16V
  • Fuel Type: All
  • Approval Class: Approved for Use
  • Reference: 12-1880AM

Innio-Waukesha (mandatory use of approved oils in cogen installations and in APG 220 installations)

  • Series: APG 16V150LTD
  • Fuel Type: All
  • Approval Class: Suitable for Use
  • Reference: 12-1880AM

Liebherr

  • Series: All
  • Fuel Type: Natural Gas
  • Approval Class: Suitable for Use
  • Reference: LH-00-TFG

Mitsubishi Heavy Industries

  • Series: GS16R2
  • Fuel Type: Natural Gas
  • Approval Class: Suitable for Use
  • Reference: JE17SGSR002

MAN Augsburg

  • Series: All Gas Engines
  • Fuel Type: Natural Gas
  • Approval Class: Suitable for Use

MAN Nuremberg

  • Series: All Stationary Engines
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use
  • Reference: M 3271-2

MTU On-Site Energy (Rolls Royce Power Systems)

  • Series: 400 Series
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use
  • Reference: EOPG 06/2019

MTU On-Site Energy (Rolls Royce Power Systems)

  • Series: 4000 Series (L61, L62, L63)
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use
  • Reference: BR4000

MTU On-Site Energy (Rolls Royce Power Systems)

  • Series: 4000 Series (L32, L33, L64)
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use
  • Reference: BR4000

Rolls Royce Bergen

  • Series: Bergen K-G1 / -2 / -3
  • Fuel Type: Natural Gas
  • Approval Class: Suitable for Use
  • Reference: Rolls Royce 1503

Rolls Royce Bergen

  • Series: Bergen K-G4
  • Fuel Type: Natural Gas
  • Approval Class: Suitable for Use
  • Reference: Rolls Royce 1502

Rolls Royce Bergen

  • Series: Bergen B-G
  • Fuel Type: Natural Gas
  • Approval Class: Suitable for Use
  • Reference: Rolls Royce 1503

Rolls Royce Bergen

  • Series: Bergen CR-G
  • Fuel Type: Natural Gas
  • Approval Class: Suitable for Use
  • Reference: Rolls Royce 1503

Siemens (formerly Guascor)

  • Series: Siemens SGE-H and SGE-S series
  • Fuel Type: Natural Gas
  • Approval Class: Suitable for Use

Siemens (formerly Guascor)

  • Series: Guascor HGM, FGLD and SFGLD series
  • Fuel Type: Natural Gas
  • Approval Class: Suitable for Use
  • Reference: IC-G-D-25-005e

TEDOM

  • Series: T50
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use
  • Reference: 61-0-0281.1

Wärtsilä

  • Series: all SG gas engines and all DF dual fuel engines running predominantly on gas
  • Fuel Type: Natural Gas
  • Approval Class: Suitable for Use
  • Reference: 4V92A0780

Volkswagen

  • Series: ECOBLUE 2.0
  • Fuel Type: Natural Gas
  • Approval Class: Verified for Use

205L
?
205L
IBC
?
IBC
BULK
?
BULK

Receive a free personalised quote for any product

Get a quote
up-arrow-icon